Privateer Press Hordes Bag Standard Half Tray Load Out (Black)

The revolutionary design of the Hordes bag features many great options. Its rugged, black Ballistic Nylon exterior protects a hard plastic interior built for strength and durability. The Privateer Press and Hordes logo are clearly embroidered on the bag to help show off your colors. Areas on the bag allow for award medals to be hung and velcro patches to be applied. Pockets and storage areas have been built with Hordes players in mind. A convenient area in the back of the bag will hold over 30 card sleeves. There are pockets for extra cards. Also included in the back area is a friendly place for four dry erase markers to mark your cards. Lastly, you have the main foam area. With this load out option, you will receive 7x foam trays and 1x foam topper with your bag. These trays were designed with the staff from Privateer Press. Each tray has sections tailored to fit the most oddly shaped models. With your Hordes bag you get: 1x Universal 120mm Base Tray - 7.5 inch (mm) thick tray that will hold one model on a 120 mm base. The pluck foam area is available where the arms/weapons are positioned on the model. This will allow you to customize the fit for your specific model. 1x Warjack/Warbeast Half Tray - 4 inch (101 mm) thick tray with 3x 3 x 2 1/2 inch (76 x 64 mm) cut outs and 3x 3 1/2 x 2 1/4 inch (89 x 57 mm) cut outs. 1x Oversized Medium Troop Half Tray - 2 inch (50 mm) thick tray with 6x 3 x 2 inch (76 x 50 mm) cut outs. 1x Medium Troop Half Tray - 2 inch (50 mm) thick tray with 8x 2 1/4 x 1 1/2 inch (57 x 38 mm) cut outs and 3x 2 1/2 x 2 inch (64 x 51 mm) cut outs. 1x Medium Troop Tray - 2 inch (51 mm) thick tray with 16x 2 1/4 x 1 1/2 inch (57 x 38 mm) cut outs and 6x 2 1/2 x 2 inch (64 x 51 mm) cut outs. 1x WWX Small Troop Tray - 1.5 inch (38 mm) thick tray with 18x 1 7/8 x 1 1/4 inch (mm) cut outs and 12x 2 x 1 1/4 inch (mm) cut outs. 1x Alternate Small Troop Tray - 1.5 inch (38 mm) thick tray with 20x 2 x 1 1/4 inch (50 x 31 mm) cut outs, 6x 2 x 1 1/2 inch (50 x 38 mm) cut outs, 2x 3 7/8 x 1 1/2 inch (99 x 38 mm) and 2x 3 x 1 1/2 inch (76 x 38 mm) cut outs. 1x Foam Toppers Tray Dimensions - 15.5W x 8.5L" (394W x 216L mm) and 8.5W x 7.75L" (216W x 197L mm) These trays will hold 105 small base models, 22 medium base models, and 24 large base models.