Iwata Power Jet Pro auto twin with tank

Iwata Studio Series compressors are powerful, compact and quiet. With oil-less piston motors, they are low maintenance and affordably priced. The Iwata Studio Series are the perfect companion to any of the Iwata airbrushes.

The Power Jet Pro is twice as powerful as a Sprint Jet, so you can run two fine airbrushes or one high-flow airbrush or a small low-volume spray gun at low pressure. It has dual air regulators and gauges for setting the pressure for each airbrush independently.

The Power Jet Pro has a 2 litre tank reservoir, which increases moisture separation and smoothes out the air flow. This type of machine is preferred when heavy use is expected or higher pressures required.

Applications:

The Power Jet Pro features:

Low maintenance, oil-less twin piston air compressor
Quiet running 1/6 Hp induction motor
2 litre storage tank
Air flow at 0 psi: 0.88 CFM (25 lpm)
Working pressure from 0 psi to 60 psi
Dual moisture filters
Dual mounted pressure gauges
Dual air regulators for precise pressure adjustment
Dual quick disconnect ports (2 x 1/4 BSP outlets with 2 x 1/4 BSP quick releases)
Dual airbrush holders
Smart Technology automatic switching reduces running time and motor wear (55 psi on / 75 psi off)
Protective outer case
Comes with two 3m (10\') coiled vinyl hoses
On/off switch
Size: H 33 x W 18 x H 30 cm (approx including handle and fittings)
Weight: 11.9kg
Voltage: 220-240V 50Hz
Noise level: 52 decibels
Duty cycle: 60 minutes continuous use. Please allow the motor to rest for at least 20 minutes after each cycle of continuous use.
Click here to compare these features to other Iwata compressors.


The Power Jet Pro is suitable for running two of the following or other similar fine airbrushes concurrently:

Neo for Iwata
Iwata Revolution
Iwata Eclipse (except G3, G5, G6)
Iwata HP
Iwata HP-Plus
Iwata Hi-Line
Iwata Custom Micron
Iwata Kustom series
Paasche CC
Paasche F
Paasche Talon
Paasche V
Paasche VJR
Paasche VSR90
Paasche VV
Badger 100
Badger 150 (except with HD head)
Premi Air G35
The Power Jet Pro is suitable for running one of the following airbrushes, small spray guns or similar:

Iwata Eclipse G3
Iwata Eclipse G5
Iwata Eclipse G6 (not fan pattern)
Iwata RG-3 (up to 0.6mm nozzle and at low pressure for tanning only)
Iwata LPH-50 (up to 0.6mm nozzle, not fan pattern and at low pressure for tanning only)
Paasche H
Paasche HS
Paasche VL
Paasche VLS
Paasche MIL-SET
Paasche AEC
Paasche 200T (at low pressure for tanning)
Badger 150 HD
Badger 155
Badger 175
Badger 200
Badger 250
Badger 260
Badger 350
Asturo C3 (at low pressures for tanning only)
Rio tanning airbrush


If you require further advice on choosing the most suitable equipment for you needs and budget, or if you have any doubt about the compatibility between equipment you are buying and equipment you already own, then please contact us.