Product can be shipped to:
United Kingdom only (due to weight / size). Please Contact Us if you require shipping outside of the UK and we would be happy to help.
A300SD 50 x 38cm Ducted Extractor Product Description
PLEASE NOTE: This product is made-to-order by our supplier, and we expect at least a two-week turnaround before we receive it from them. The default expected dispatch date therefore may not reflect the actual dispatch date of your order.
Extraction Unit for Aerosols, Airbrushes and more.
The A300S-D contains, filters and extracts for a cleaner, healthier working environment for the hobbyist, modeller and arts and craft enthusiast.
NOTE: This unit exhausts air via flexi-duct to atmosphere.
Applications include filtration and removal of Aerosol paints, lacquers, adhesives (glue booth for spray mount) and airbrush over-spray. Solder fume, general solvent vapours and gases extracted to atmosphere. Filtration of grinding dusts, general particulates and powders etc.
Description:
Steel construction finished in dove grey � plastic replaceable spray/fume shield � particulate filter � centrifugal blower, external rotor motor type brushless, U, VDE and CSA approved � sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 Meters x 100mm dia. � carry handle.
Operation:
All of our filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
The flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This unit can be used in two positions.
Horizontal position � for Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.
Vertical position - For model sprays and airbrush use � light grinding particles (not sparking) � solder fume extraction and general solvent and gas extraction.
Filtration: The particulate (intake) filter is a three stage graduated fibre with a high \'dust\' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposure to potentially hazardous substances.
Specification:
Model Number: A300S-D
Fan Motor* Spec: 230V 50Hz 105W
Air Volume At Free Air: 255 m3/hr (150 CFM)
Ave. Air Velocity At Filter Face: 0.6 m/sec
Ave. Air Velocity At Shield Face: 0.50 m/sec
Noise Level LAeq dB(A): 58
Weight: 10 kgs
Dimensions: w = 565mm, h = 390mm, depth = 430mm
110 Volts 50 or 60Hz available if required
This unit is designed for studio/workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants. It is not recommended for continual usage, i.e. production applications.